Circular machine No. 8 large gasket

$0.15-0.2 /Piece/Pieces

Payment Type:	L/C,T/T,D/P,D/A,Paypal,Others
Incoterm:	FAS,EXW,CIF,CFR,FOB,DES,FCA,CPT,CIP,DEQ,DDP,DDU,Express Delivery,DAF
Min. Order:	1000 Piece/Pieces

Contact Now

Product Description

Product Attributes

Applicable Industry: Manufacturing Plant

Out-of-warranty Service: Online Support, Video Technical Support

Where To Provide Local Services (in Which Countries Are There Overseas Service Outlets): None

Showroom Location (in Which Countries Are There Sample Rooms Overseas): None

Status: New

Product Type: Other

Machine Type: Circular

Place Of Origin: China

Weaving Style: Flat

Weaving Method: Single

Programming Control: No

Warranty Period: Unavailable

Core Selling Point: Easy To Operate

Weaving Width: Other

Mechanical Test Report: Not Available

Video Factory Inspection: Not Available

Marketing Type: Ordinary Product

Core Component Warranty Period: Other

Packaging & Delivery

Selling Units

Piece/Pieces

Product Description

1. The sealing surface of the sealing gasket and flange should be cleaned, and there should be no scratches, spots and other defects that affect the sealing performance of the connection.
2. The outer diameter of the sealing gasket should be smaller than the outer surface of the flange, the inner diameter of the sealing gasket should be slightly larger than the inner diameter of the pipeline, and the difference between the two inner diameters is generally 2 times the thickness of the sealing gasket to ensure that after pressing, the inner edge of the sealing gasket does not extend into the container or pipeline, so as not to hinder the flow of fluid in the container or pipeline.
3. The preload of the sealing gasket should not exceed the design regulations, so as to avoid excessive compression of the sealing gasket and loss of rebound ability.
4. When the sealing gasket is pressed, it is best to use a torque wrench. For large bolts and high-strength bolts, it is best to use a hydraulic tensioner. The tightening torque should be calculated according to the given sealing gasket compression, and the size of the hydraulic tensioner oil pressure should also be determined by calculation.
5. When installing the sealing gasket, the nuts should be tightened sequentially in order. However, it should not be twisted once to reach the design value. Generally, it should be cycled at least 2~3 times so that the stress distribution of the sealing gasket is uniform.
6. For pressure vessels and pipelines with flammable and explosive media, safety tools should be used when replacing sealing gaskets, so as to avoid sparks caused by the tool colliding with flanges or bolts, resulting in fire or explosion accidents.
7. If there is a leakage in the pipeline, the sealing gasket must be replaced or adjusted after the pressure reduction treatment, and it is strictly forbidden to operate with pressure.

Round Gaskets

In addition, we have other accessories such as Circular machine oiler, Control Panel, Adjustable Yarn Bobbin Cover, Synchronous Belt, Needle Cylinder and so on.